Location: Home >>News >>Company News

      Crane Near Electricity Sensor Alarm, "Non-Contact Guardian" for Vehicle Early Warning Against Electrocution

      Author: Click:224 Time:2024-08-08

      The construction of buildings in the power facilities protection zone is not allowed. However, some infrastructure projects sometimes have to work in

      The construction of buildings in the power facilities protection zone is not allowed. However, some infrastructure projects sometimes have to work in the transmission line protection zone or high-voltage conductors, and some private "unauthorized construction", the process of cranes, excavators, pump trucks and other construction equipment in the high-voltage line operation led to electrocution, fire accidents reported every year, people can not help but think about: in the end, how to safeguard the people, Car safety?



      First of all, we have to be clear about one basic fact: work-at-height in the protected areas of electric power facilities must comply with strict regulations, including but not limited to going through the appropriate approval procedures and taking the necessary safety measures. Unauthorized entry into these zones for construction is undoubtedly a violation of the law.

      In addition, the construction unit or operator should not hold the "nothing has happened before, this time will not be fine", the mentality of fluke, carelessness, ignoring the safety risk assessment and the implementation of preventive measures.

      However, as the old saying goes, "Drowning in shallow water", for example, due to the angle of the problem or direct sunlight on the face and other reasons, the operator will face a visual blind spot, when the crane arm extends to a certain height, if it fails to notice and adjust the direction in time, it is easy to come into contact with high voltage wires, triggering a safety accident.

      At this time, don't be stubborn, seek "science and technology to protect the body" is the best policy. DX-JDS100 crane near electric induction alarm, referred to as crane near electric alarm, designed for the high voltage lines, transmission line protection zone, high-speed rail contact network under the construction of vehicles, cranes, cranes, fire trucks, dump trucks, tower cranes and other vehicles and born, used to prevent accidents occurring in the operation of the high-voltage lines and the distance between the high voltage line is too close to ensure that the people, cars, transmission line safety.



      The whole set of devices without wiring, safety at any time, dismantling, can be reused in different vehicles, the main two parts are - the sending end, the receiving end, the sending end is fixed on the side of the mechanical arm, real-time detection of high-voltage strong electrical signals and through the 2.4G wireless way to transmit data (send alarm signals); receiving end is installed in the cab of a person, the operating The receiving end is installed in the driver's cab, so that the operator can receive high decibel warning reminders in real time when operating the arm and driving the vehicle. The receiver is installed in the driver's cab.

      Insufficient safety distance from energized lines is an important factor leading to touching and electrocution. Such as large machinery such as cranes, dump trucks, excavators, etc. in the power lines near the work, you need to pay special attention to maintain a sufficient safety distance, and the arrangement of the "near power alarm", you can ensure that the entire construction process of high-voltage signal real-time detection of strong electricity, real-time early warning to ensure that the operator receives the hand "! High-voltage danger  Do not approach" reminder tone, timely adjustment of the car arm, body.

      Don't look at it plain and simple, as the anti-electrocution alarm in the high-voltage power equipment non-contact intelligent early warning system, the use of near-electricity alarm, can help you with the danger of "say goodbye"!



      Related recommendations

      The online monitoring, distributed fault location and cable online monitoring equipment for power transmission and distribution lines launched by SHENZHEN DINSEE SMART TECHNOLOGY CO.,LTD. has been widely used in Southern Power Grid and State Grid, and has achieved good results.

      Record No.: Yue ICP Bei 2022070794-1 | Website Map XML Map

      主站蜘蛛池模板: 国内少妇偷人精品视频免费| 久久久国产乱子伦精品作者| 精品一区二区三区四区| 欧美日韩精品| 亚洲国产精品成人精品无码区| 老司机精品影院91| 99精品国产在热久久| 亚洲av午夜福利精品一区| 国产午夜精品久久久久免费视| 久久国产精品无码HDAV| 亚洲永久精品ww47| 亚洲综合国产精品第一页 | 一本色道久久88综合日韩精品| 国产精品久久久久影视不卡| 久久精品国产99国产精偷| 久久99国产精品一区二区| 国产精品日日摸夜夜添夜夜添1国产精品va欧美精| 人妻一区二区三区无码精品一区| 国产精品H片在线播放| 人妻少妇精品无码专区动漫| 国产福利精品视频自拍 | 人妻少妇精品中文字幕AV | 国产成人综合精品一区| 动漫精品专区一区二区三区不卡| 久久Av无码精品人妻系列| 最新国产乱人伦偷精品免费网站| 久久久精品国产Sm最大网站| 国产精品自在拍一区二区不卡| 99久久精品国产毛片| 在线精品国产一区二区| 久久99国产精品99久久| 99re久久精品国产首页2020| 精品不卡一区二区| 精品人妻人人做人人爽| 人人妻人人澡人人爽人人精品97 | 国产乱人伦偷精品视频免观看 | 国产精品视频永久免费播放| 久久亚洲私人国产精品vA| 久久久无码人妻精品无码| 久久99国产综合精品免费| 日韩精品人妻系列无码专区|