Location: Home >>News >>Company News

      Intelligent diagnosis of cable faults: fault early warning and precise location device to ensure reliable power supply!

      Author: Click:185 Time:2024-09-27

      A cable or cable overhead hybrid line, referred to as a overhead line-cable hybrid line, is a type of electric power transmission and distribution lin

      A cable or cable overhead hybrid line, referred to as a overhead line-cable hybrid line, is a type of electric power transmission and distribution line that combines the use of overhead lines and cable lines. In this hybrid line, overhead lines and cable lines can be flexibly combined according to the actual demand, in order to achieve the purpose of improving the power transmission and distribution capacity and reducing the system outage rate. Compared with pure overhead lines or pure cable lines, hybrid lines cost less, can save the initial investment and daily operating costs, especially in the urban power grid renovation, power grid construction in new areas and special terrain conditions of power transmission and distribution, hybrid lines are playing an important role. So, for their "old diagnosis", can be realized in what way?



      Our High Voltage Cable Fault Early Warning and Localization Device DX-WPS100-GZ02 is used to quickly and accurately Detect and locate fault points in cable lines quickly and accurately, and realize fault identification based on fault waveforms. Adopting the method of cable joint ground current + temperature monitoring, the device is usually installed at the cable joint. The distributed traveling wave algorithm is utilized to achieve fault point localization when the cable length is known.



      Key Features:

      1、Signal Acquisition: Adopting the structure of one host and multi-channel, the whole frequency band covers the signal of common fault types, and it can simultaneously acquire 7 high-frequency signals (3 high-frequency current traveling wave, 3 hidden current traveling wave, 1 voltage traveling wave) and 8 low-frequency signals (3 industrial frequency current, 4 ground loop current, 1 voltage);

      2, timing: in order to ensure the strict synchronization of the signal at both ends, timing module through the satellite or fiber optic clock synchronization, accurate recording of the time when the traveling wave arrives at both ends of the line;

      3, fault location: based on the principle of traveling wave positioning, can be quickly calculated after the cable fault occurs, the fault interval and the location of the fault point;

      4, fault identification: through the A, B, C three-phase current traveling wave, industrial frequency fault current traveling waveform analysis, can intelligently identify the type of fault, such as unidirectional grounding, phase-to-phase short circuit;

      5, fault early warning: by monitoring the strong traveling wave signals at both ends of the cable, it can realize the fault early warning of defective cable joints and body.

      CT power extraction: Built-in high-precision CT power extraction coil + power conversion module. Support solar energy, utility external access, battery capacity 20Ah.



      technical specification

      1, fault location accuracy: ≦ L * 0.5% +5m (L is the length of the cable)

      2、Synchronization error:<20ns

      3, grounding current sampling range: 0 ~ 300A

      4, traveling wave current sampling range: 10mA ~ 1000A

      5、Hidden current sampling range:10mA~10A

      6, temperature monitoring range: -45 ℃ ~ +125 ℃



      With the development of smart grid, high-voltage cables, as an important part of the grid, are of irreplaceable importance to ensure the stable operation of the power system and to promote socio-economic development, and the The application of high-voltage cable fault early warning and positioning device also further enhances the intelligent level of the power grid and the reliability of power supply.



      Related recommendations

      The online monitoring, distributed fault location and cable online monitoring equipment for power transmission and distribution lines launched by SHENZHEN DINSEE SMART TECHNOLOGY CO.,LTD. has been widely used in Southern Power Grid and State Grid, and has achieved good results.

      Record No.: Yue ICP Bei 2022070794-1 | Website Map XML Map

      主站蜘蛛池模板: 亚洲а∨天堂久久精品9966| 亚洲精品美女久久久久99小说| 国自产精品手机在线观看视频| 亚洲精品无码久久千人斩| 国语自产拍精品香蕉在线播放| 精品国产亚洲男女在线线电影 | 中文字幕亚洲精品资源网| 午夜精品久久久久久毛片| 国产乱子伦精品无码专区| 久久国产精品久久国产精品| 久久精品无码专区免费东京热| 久久久久亚洲精品无码网址 | 中文字幕精品久久| 白浆都出来了视频国产精品| 国产精品天干天干综合网| 亚洲色精品88色婷婷七月丁香| 国产精品日韩欧美久久综合| 999成人精品视频在线| 久久精品国产亚洲AV高清热| 亚洲精品人成无码中文毛片| 国产亚洲精品无码拍拍拍色欲| 精品一区二区在线观看| 亚洲av午夜福利精品一区| 国产精品欧美一区二区三区| 99久久国产综合精品网成人影院| 国产精品v欧美精品v日韩精品| 久久精品夜夜夜夜夜久久| 无码精品黑人一区二区三区 | 国产午夜福利精品一区二区三区| 亚洲电影日韩精品 | 国产午夜精品一区二区三区漫画| 在线精品国产一区二区三区| 欧洲精品码一区二区三区免费看| 国产成人久久久精品二区三区 | 精品国产热久久久福利| 国产精品v欧美精品v日本精| Xx性欧美肥妇精品久久久久久| 真实国产乱子伦精品免费| 91久久精品视频| 国产精品久久久久一区二区三区| 中文字幕精品视频|